EcoQuip : Blast Equipment

MODEL EcoQuip 2 EQm
POTCOATING A-Coat/Powder
POTCAPACITY(LB) 100L(3.5cuft)
WATERTANK Polyethylene(accessoryonly)
ENCLOSURE Coated
BLASTCIRCUIT 1.00in(25.4mm)
FRAME None
MAX.COMPRESSEDAIR 14m3/min(500 cfm)
MAX.BLAST PRESSURE 12.1bar(175psi)
WATERDOSE Notincluded
WATERHOSEHOOK-UP Yes
NOZZLE #7
HOSERACK N/A
STEP N/A
MEDIASTRAINER No
MEDIASHELF N/A
GRACOBLAST HOSE Yes
WATERTANK FILTER (NONEEDFORRUST INHIBITOR) N/A
NOZZLE PRESSUREVERIFICATION KIT Yes
MANUAL 3A3489

Why EcoQuip? (Professional use only)

• Same performance as sandblasting
• 92% less dust, minimizing tenting and containment
• Up to 75% of blast media savings
• Less restrictive PPE requirements
• Reduced environmental impact
• Far less water than wet blasting – no large slurry mess to clean-up

How EcoQuip works

EcoQuip blasts with wet abrasive media. Abrasive media and water are combined in a blasting pot which is pressurized only by water. By encapsulating each blast particle with water, extra weight is added to the media which enlarges the impact of the blast media on the substrate. The removal and feathering of the material goes smoother and less media is being used. The water reduces splash back and traps the dust being produced.

EcoQuip 2 : Makes Any Job Easier

EcoQuip 2 helps you to expand your business with different applications

EcoQuip 2 can be used for concrete repair, coating removal, steel surface preparation and graffiti removal. The versatility of EcoQuip 2 is one of the characteristics that makes this equipment so remarkable. The best part is how easy it is to switch from one application to another. EcoQuip 2 is designed to accept any media heavier than water and has a blast rating of up to 12 bar (175 PSI).

Expanding your business

With EcoQuip 2, contractors are no longer limited to just one or two types of jobs. Instead of focusing solely on steel surface preparation, that same contractor could now expand his business into the concrete repair or restoration market using the same equipment.

EcoQuip : Vapor Abrasive Blast Equipment

The latest innovation in abrasive blasting

Fast

• 50% faster start-up*
• 50% faster media reload process from empty*
• Faster production rates than previous Graco models and equipment with similar technology

*Compared to previous EcoQuip models

Easy

• Set-up EcoQuip 2 in just five simple steps
• No longer need to set pot pressure relative to blast pressure
• Easily adjust blast pressure and use media valve to regulate media

Reliable

• Every unit is tested using a state-of-the art bench before it ships
• Unparalleled customer and technical support to assist with equipment needs
• Components tested to the strictest Graco standards

What is Vapor Abrasive Blasting

Vapor Abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less
dust.

Less Dust Means Less Containment and Clean-up

Testing conducted by a third-party agency shows that vapor abrasive blasting suppresses up to 92% of dust compared to dry blasting.

Because dust is minimised, less containment may be required and media clean-up time can be reduced. Since EcoQuip 2 uses less water than slurry or other water-based technologies, no pools of water are left behind, and there is less need to worry about toxic runoff. The end result with EcoQuip 2 is a cleaner, more effectively contained process.

Vapor Abrasive blasting enables maximum control over the air pressure and water/abrasive mixture, allowing for blasting of a wider range of surfaces and reducing the amount of media.

Vapor Abrasive blast systems for coating removal and surface preparation

Precision and Control

Monitoring abrasion with precision and control is an exclusive feature from Graco. EcoQuip 2 uses MediaTrak and an abrasive meter in order to quickly and easily set and monitor the abrasive consumption rate. The simple, user-friendly screen helps you set the media flow to optimal levels for the most effective blast. It tracks pump cycle rates and maintains an overall total, enabling you to schedule maintenance at regular intervals and ensures that you always receive the best performance from EcoQuip 2.

EcoQuip 2 EQm

A compact, fully portable entry-level unit

The built-in hand truck with over-sized wheels makes the EQm easy to move around the job site. Don’t let the size fool you: this compact blaster is capable of handling any type of project, from cleaning to surface preparation.

• Fits in the bed of most standard pickup trucks
• Blast pressure ranging from 1.7-12.1 bar (25-175 PSI)
• Oversized wheels for easy portability
• Pot size of 100 L (3.5 cubic ft) – holds approximately (8) 25 kg (55 lb) bags of media

BLAST CONTROL
Model PN Pneumatic* Electric* ATEX Description
EQm 262950 Mobile units have a coated enclosure and water inlet regulator for the hose connection.
EQm 262952* X
EQm 262953* X
EQm 262954* X X

Interested?

I want to receive:

Price information
Customized advice
Brochure
GET IN TOUCH

BRANDS


abnox
ABNOX
Authorised Distributor
groeneveld
Groeneveld
Authorised Distributor